IM 2800P Flue Gas Analysis with up to 6 sensors

IM 2800P - Flue gas analysis with up to 6 sensors

With the IM 2800P flue gas analyzer, emissions from industrial combustion plants can be analyzed easily and reliably.

• Flue gas measurement, pressure measurement, temperature measurement, differential pressure measurement (optional), high temperature measurement up to 1500°C (optional), flow velocity measurement (optional), soot measurement (optional)
• Maximum 6 sensors: O2, CO, NO, NO2, SO2, H2S, HC, CO2
• 4-line illuminated display for simultaneous display of 6 measured values
• Robust case with additional compartment
• RS232 interface
• Statistics function with averaging values
• Rechargeable battery; Working time up to 6 hours
• Thermal printer
• Longer probe tubes (optional)

Compact - Robust - Powerful

The IM 2800P4 is equipped with an oxygen (O2), carbon monoxide (CO), nitrogen oxide (NO) and sulfur dioxide (SO2) sensor. Of course, the most important combustion parameters are calculated. The IM 2800P4 can be equipped with two additional sensors. These can be IR sensors for measuring e.g carbon dioxide CO2 or hydrocarbon HC, as well as electrochemical sensors such as hydrogen sulfide H2S. Optionally, exhaust gas temperatures of up to 1500°C can be measured.

Specifications

The IM 2800P is equipped with an oxygen sensor and a maximum of 5 additional gas sensors can be installed.

• Oxygen O2 0 - 20.9 Vol.%
• Carbon monoxide CO 0 – 2,000 ppm / 10,000ppm / 10.00 %
• Nitrogen oxide NO 0 – 2,000 ppm
• Sulphur dioxide SO2 0 – 4,000 ppm
• Nitrogen dioxide NO2 0 - 100 ppm (optional)
• Hydrogen sulfide H2S 0 - 100 ppm (optional)
• Hydrocarbons HC 0 - 5.00 Vol.% (optional)
• Carbon dioxide CO2 measured 0 - 25.00 Vol.% (optional)
• Carbon dioxide CO2 calculated 0 - 30.0 Vol.%
• Losses qA 0 - 99.9 %
• Excess Air 1 - 9.99
• Flue gas temperature -20 to 1200°C
• Flue gas temperature-20 to 1500°C (optional)
• Combustion air temperature -20 to 120°C
• Draft / pressure +/- 20hPa
• Differential pressure +/- 40 hPa (optional)
• Flow velocity 130 m/s (optional)
• Soot measurement according to filter paper method (optional)
• Gas sampling probe, length 250mm, hose 2.5m
• Power supply 240VAC / 120VAC / battery
• Dimensions 380 x 185 x 315 mm
• Weight 7.5 kg
• Operating temperature 0°C.. 40°C (10-90% RH, non-condensing)

Scope of delivery

• Flue Gas Analyser IM 2800P
• Gas sampling probe
• Operating instructions
• Calibration protocol

IM Env. Equip. Germany GmbH reserves the right to make technical changes.