NSIILCD Gas Detector

NSIILCD - GAS DETECTOR AND REFRIGERANT DETECTOR

The gas detector NSIILCD is suitable for ATEX Zone 2 and can detect numerous gases and refrigerants. The gas detector has a large LCD display and can therefore be operated as a stand-alone device. Of course, the NSIILCD can also be connected to a control panel.

• Sensors – Catalytic, Electrochemical, Infrared, PID, Semiconductor
• ATEX – Suitable for potentially explosive atmospheres ATEX Zone 2
• Enclosure protection class – IP54 or IP64 with water protection cover
• Software – configuration and service software, visualization software for the warning center
• Cable glands – Quick and easy installation of all connections and connections

DETECTOR FOR ATEX ZONE 2

The NSIILCD gas / refrigerant detectors are used in industrial and commercial plants and monitor the rooms reliably and permanently for leaks. The stand-alone detectors can be connected to a DEGA UPA III, UKA III, UDA III gas controller. Various gases and refrigerants such as HFOs (e.g. R1234yf), ammonia, gasoline vapor, butane, oxygen, methane, propane and many more can be detected.

The NSIILCD gas detector is equipped with an LCD to display the current concentration and can optionally be equipped with an alarm relay module with 3 relays. The detector also has a digital interface RS485 (DEGA) and an analog output (4-20mA) and can therefore also be connected to a control unit.

The gas detector is not only easy to install but is also suitable for installation in potentially explosive atmospheres of ATEX Zone 2.

Specifications

• Gases / Refrigerants: HFOs (R1234ze), HFCs, CFCs, HFCs, ammonia, gasoline vapor, oxygen, carbon dioxide, methane, propane, butane, carbon monoxide, nitrogen dioxide, nitrogen oxide, sulfur dioxide, hydrogen sulfide, chlorine, ethanol, etc.
• Other gases on request
• Sensor life: Catalytic up to 2 years; Electrochemical up to 3 years; IR over 5 years; PGD 1 year
• Analog Output: 4-20mA
• Digital output: RS485 - DEGA protocol; MODBUS (optional)
• Alarm relays (optional): 3 pcs, 230VAC @ 10A
• Power supply: 8-30 VDC; max. 3.7W
• Dimensions / Weight 140 x 140 x 70 mm / 700 g
• ATEX: ATEX II 3 G db ice c nC IIC T5/4 Gc Tamb: 0-40°C
• Ambient Conditions: max. 95% RH
• Site BE3N2 – Environment with explosion hazard, Zone 2

Scope of delivery

• Gas detector NSIILCD
• Magnetic wand
• Operating instructions

IM Env. Equip. Germany GmbH reserves the right to make technical changes.